How To Register Your Honeywell Thermostat
Programming User Manual
Honeywell WiFi Thermostat
Model: RTH65801006 & RTH6500WF Smart Series
Read and salve these instructions.
For help please visit honeywellhome.com
Observe Rebates: HoneywellHome.com/Rebates
In the box you will observe
- Thermostat
- Wallplate (attached to thermostat)
- Screws and anchors
- Quick Start Guide
- Thermostat ID Card
- Wire labels
- User Guide
- Quick Reference Menu
Welcome
Congratulations on your buy of a Smart programmable thermostat. When registered to Total Connect Comfort, you can remotely monitor and control the heating and cooling system in your home or business concern—you can stay continued to your comfort system wherever yous become.
Total Connect Condolement is the perfect solution if you travel frequently, own a holiday home, a business or manage an Investment belongings or if you are simply looking for peace of mind.
Precautions and Warnings
- This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not piece of work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric estrus.
- MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or i-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.
- NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50°F (10°C).
Need help?
Visit honeywellhome.com for aid earlier returning the thermostat to the store.
Features of your thermostat
With your new thermostat, you can:
- Connect to the Internet to monitor and control your heating/cooling arrangement
- View and change your heating/cooling system settings
- View and fix temperature and schedules
- Receive alerts via e-mail and get automated upgrades
Your new thermostat provides:
- Smart Response Technology
- Compressor protection
- Heat/cool auto changeover
Controls and home screen quick reference
In one case your thermostat is installed, it will display the home screen. Portions of this display volition change depending on how yous are viewing it.
Preset energy-saving schedules
This thermostat is pre-set with free energy-saving plan settings for four time periods. Using the default settings can reduce your heating/cooling expenses if used as directed. Savings may vary depending on geographic region and usage. To change the settings.
Setting up your thermostat
Setting up your programmable thermostat is easy. Information technology is preprogrammed and gear up to go every bit soon as information technology is installed and registered.
- Install your thermostat.
- Connect your home Wi-Fi network.
- Register online for remote admission.
Earlier you brainstorm, yous may want to lookout man a cursory installation video. Use the QR Lawmaking® at the front of this guide, or become to honeywellhome.com/support
Connecting to your Wi-Fi network
To consummate this process, you lot must have a wireless device continued to your home wireless network. Any of these device types will work:
- Tablet (recommended)
- Laptop (recommended)
- Smartphone
If you get stuck… at any point in this procedure, restart the thermostat past removing the thermostat from the wallplate, expect for x seconds, and snap it dorsum onto the wallplate. Go to Step 1 in this procedure.
View the Wi-Fi Enrollment video at honeywellhome.com/wifi-thermostat
- Connect to your thermostat.1a. Make sure the thermostat displays Wi-Fi Setup.1b. On the wireless device (laptop, tablet, smartphone), view the list of bachelor Wi-Fi networks.
1c. Connect to the network called NewThermostat_123456 (the number will vary).
Note: If yous are asked to specify a home, public, or office network, select Home Network.
- Join your dwelling house network. 2a. Open your web browser to admission the Thermostat Wi-Fi Setup folio. The browser should automatically direct y'all to the correct page; if it does non, go to http://192.168.i.12b. Notice the name of your home network on this page and select information technology.
Note: Some routers have enhanced features such as guest networks; employ your abode network.
2c. Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may run into an instruction such as Enter Password for your home network.)
Notation: If you did non correctly connect to the thermostat, you may run into your home router folio. If so, render to Step 1.
Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page:
• Try performing a network rescan past pressing the Rescan button. This is helpful in areas with a lot of networks.
• If you are connecting to a hidden network, then enter the network SSID in the text box, select the encryption type from the drop downwardly carte du jour, and click on the Add button. This manually adds the network to the top of the list. Click on the new network in the listing and enter the password if necessary. Click on Connect to join the network. - Brand sure your thermostat is continued.While the connexion is in process, your thermostat will flash Wait for upwardly to 3 minutes. When the connection is complete, the brandish will prove Wi-Fi Setup Connection Success. The Wi-Fi bespeak strength will appear in the pinnacle-right corner.Afterward nearly lx seconds, the habitation screen will announced and Annals at Total Connect volition flash until registration is complete.
If yous don't come across these messages, see page 10.
To annals online for remote access to your thermostat keep on page 12.
Note: If the thermostat displays Connection Failure or continues to display Wi-Fi Setup, confirm yous correctly entered your home network password in footstep ii. If correct, refer to the FAQ at honeywellhome.com/support
Registering your thermostat online
To view and set your thermostat remotely, you must take a Total Connect Comfort business relationship. Use the post-obit steps.
- Open up the Total Connect Condolement web site.
Go to mytotalconnectcomfort.com
View the Thermostat Registration video at
honeywellhome.com/wifi-thermostat - Login or create an business relationship. If you take an business relationship, click Login – or – click Create An Account.2a. Follow the instructions on the screen.2b. Check your e-mail for an activation message from My Total Connect Comfort. This may take several minutes.
Note: If you practise not receive a response, check your junk mailbox or use an alternate email address.
2c. Follow activation instructions in the e-mail.
2d. Log in.
- Register your thermostat.
After you are logged in to your Total Connect Condolement account, register your thermostat.3a Follow the instructions on the screen. Later on calculation your thermostat location, you must enter the thermostat's unique identifiers:
• MAC ID
• MAC CRCNote: These IDs are listed on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive.
3b. When the thermostat is successfully registered, the Total Connect Comfort registration screen will brandish a SUCCESS message.
In the thermostat display, you will see Setup Consummate for about 90 seconds.3c. Also notice that your thermostat displays its point strength.
Congratulations! You lot're done. You can now command your thermostat from anywhere through your tablet, laptop, or smartphone
Total Connect Condolement free app is available for Apple® iPhone®, iPad® and iPod touch® devices at iTunes® or at Google Play® for all Android™ devices.
Search for local rebates
Your thermostat may now exist eligible for local rebates. Search for
offers in your area at HoneywellHome.com/Rebates
Setting the fourth dimension and twenty-four hours
Setting the fan
Press Fan to select On or Auto (toggle to re-select).
Auto: Fan runs but when the heating or cooling system is on. Auto is the nearly commonly used setting.
On: Fan is always on.
Note: Options may vary depending on your heating/cooling equipment.
Selecting organisation style
Press System to select:
Heat: Controls only the heating system.
Cool: Controls only the cooling system.
Off: Heating/cooling systems are off.
Car: Selects heating or cooling depending on the indoor temperature.
Em Heat (heat pumps with aux. heat): Controls auxiliary/emergency estrus. Compressor is off.
Note: Depending on how your thermostat was installed, you may not see all arrangement settings.
Adjusting program schedules
Note: Make certain the thermostat is set to the system mode you desire to program (Heat or Cool).
Overriding schedules temporarily
Overriding schedules permanently
Unregistering thermostat
If yous remove the thermostat from your Full Connect Condolement website account (for example, you're moving and leaving the thermostat behind), the thermostat will display Register at Full Connect until it is re-registered.
Disconnecting Wi-Fi
Replacing your router.
If yous disconnect the thermostat from your Wi-Fi network:
one. Enter system setup (see page 18).
ii. Change setting 39 to 0.
The screen will brandish Wi-Fi Setup.
Re-connect to a Wi-Fi network by following the steps on page 10.
Turning Wi-Fi off
If you do not plan to control the thermostat remotely, yous can remove the Wi-Fi Setup message from the screen:
one. Enter system setup (see page 18).
2. Change setting 38 to 0 (see page 19). Wi-Fi Setup will be removed from the screen. If you want to connect to the Wi-Fi network after, change setting 38 dorsum to 1.
Software updates
Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so y'all will not demand to brand any changes after the update occurs.
While the update is taking place, your thermostat screen flashes Updating and shows the percent of the update that has occurred. When the update is consummate, your home screen will appear every bit usual.
Note: If you lot are not connected to Wi-Fi, y'all will non get automatic updates.
Smart Response Technology
This feature allows the thermostat to "learn" how long the heating/cooling system takes to accomplish programmed temperature settings, and then the temperature is reached at the time you ready.
For case: Set the Wake fourth dimension to 6:00 am, and the temperature to 70°. The rut will come on before 6:00 am, so the temperature is lxx° by half-dozen:00 am.
Note: System setting function 13 controls Smart Response Technology.
Compressor protection
This feature forces the compressor to wait a few minutes before restarting, to preclude equipment impairment.
Auto changeover
This feature is used in climates where both air conditioning and heating are used on the aforementioned mean solar day.
When the system is prepare to Motorcar, the thermostat automatically selects heating or cooling depending on the indoor temperature.
Estrus and cool settings must be at least 3 degrees apart. The thermostat will automatically arrange settings to maintain this 3-caste separation.
Note: System setting function 12 controls Auto changeover.
Setting functions and options
You can change options for a number of system functions. Available functions depend on the blazon of system y'all have.
This thermostat is pre-set for a single-phase heating/cooling organization.
Setting function 1 for a heat pump will adjust the default settings.
Organisation setup
Frequently asked questions
Q: Will my thermostat still piece of work if I lose my Wi-Fi connexion?
A:Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi.
Q: How do I observe the password to my router?
A:Contact the manufacturer of the router or check the router documentation.
Q: Why am I not seeing my Wi-Fi setup page?
A:You are probably continued but to your router, not to your thermostat. Try connecting to the thermostat again.
Q: Why isn't my thermostat connecting to my Wi-Fi router fifty-fifty though it is very close to the thermostat?
A:Verify that the countersign entered for the Wi-Fi router is correct.
Q: Where can I notice my MAC ID and MAC CRC codes?
A:The MAC ID and MAC CRC numbers are included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC.
Q:My thermostat is unable to annals to the Full Connect Comfort website.
A:Verify that the thermostat is correctly enrolled on your dwelling Wi-Fi network. The message eye will display Wi-Fi Setup or Register at Total Connect. You lot might besides see the Wi-Fi Signal strength icon. Verify that the Wi-Fi router has a good internet connection. On your estimator, verify that you can open the site at mytotalconnectcomfort.com If you cannot open the site, switch off the cyberspace modem for a few seconds, then power it back on.
Q: I registered on the Total Connect Condolement website but was unable to login using my new account.
A:Check your email and ensure that you received an activation electronic mail. Follow the instructions to activate your account and and then login to the website.
Q: I have signed upwardly on the Full Connect Comfort website and have not received a confirmation email.
A:Check for the electronic mail in your Junk or Deleted folder.
Q: Is there a way to extend the signal force?
A:Virtually standard routers tin can be set upward to be a repeater. You lot can also purchase and install a Wi-Fi repeater.
For more FAQs, see honeywellhome.com/support
Troubleshooting
Lost Point
If the no-Wi-Fi indicator displays in identify of the Wi-Fi strength indicator in the upper correct paw corner of the domicile screen:
- Check another device to be sure Wi-Fi is working in your home; if not, call your Internet service provider.
- Move the router.
- Restart the thermostat: remove it from the wallplate, wait x seconds, and snap information technology back onto the wallplate. Return to Step 1 of Connecting to your Wi-Fi network.
Mistake Codes
For certain problems, the thermostat screen will display a code that identifies the trouble. Initially, error codes are displayed lonely in the time area of the screen; afterwards a few minutes, the dwelling house screen is displayed and the code alternates with the time.
Troubleshooting
If you have difficulty with your thermostat, please try the following suggestions. Most bug can be corrected quickly and easily.
Display is blank
- Cheque excursion breaker and reset if necessary.
- Brand certain power switch at heating and cooling system is on.
- Make sure furnace door is closed securely.
- Make sure C wire is connected (meet page six).
Cannot change system setting to Absurd
- Check Function ane: Organisation Type to make sure it is set to match your heating and cooling equipment
Fan does non turn on when rut is required
- Check Function three: Heating Fan Command to make sure information technology is ready to lucifer your heating equipment
Cool On or Heat On is flashing on the screen
- Compressor protection feature is engaged. Wait v minutes for the organisation to restart safely, without impairment to the compressor.
Estrus pump issues cool air in heat mode, or warm air in cool mode
- Check Function ii: Heat Pump Changeover Valve to make sure it is
properly configured for your organization
Heating or cooling organization does non answer
- Press System to set system to Heat. Make sure the temperature is set college than the Within temperature.
- Press System to prepare system to Absurd. Make sure the temperature is set lower than the Inside temperature.
- Cheque circuit breaker and reset if necessary.
- Make certain power switch at heating & cooling organization is on.
- Brand sure furnace door is closed securely.
- Wait 5 minutes for the system to answer.
Heating system is running in cool mode
- Check Function 1: Organisation Type to make sure it is set to match your
heating and cooling equipment
Heating and cooling equipment are running at the same fourth dimension
- Check Function one: System Type to make sure it is gear up to match your
heating and cooling equipment (see page eighteen). - Grasp and pull thermostat abroad from wallplate. Cheque to make sure bare wires are not touching each other.
- Check thermostat wiring is correct.
Glossary
C wire
The "C" or common wire brings 24 VAC ability to the thermostat from the heating/cooling system. Some older mechanical or bombardment operated thermostats may not take this wire connection. It is necessary for establishing a Wi-Fi connectedness to your home network.
Rut Pump heating/cooling system
Heat pumps are used to heat and cool a domicile. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a rut pump.
Conventional heating/cooling arrangement Non–heat pump type systems; these include air handlers, furnaces or boilers that run on natural gas, oil or electricity. They may or may non include an air conditioner.
Jumper
A small slice of wire that connects ii terminals together.
MAC ID, MAC CRC
Alphanumeric codes that uniquely identify your thermostat.
QR Code®
Quick response code. A two-dimensional, auto-readable image. Your wireless device can read the black and white pattern in the square and link its browser directly to a spider web site. QR Code is a registered trademark of DENSO Wave INCORPORATED.
Regulatory information
FCC Compliance Argument (Part 15.nineteen) (United states only)
This device complies with Part 15 of the FCC Rules.
Performance is discipline to the following two weather:
- This device may not cause harmful interference, and
- This device must have whatever interference received, including interference that may cause undesired functioning.
FCC Warning (Office 15.21) (USA only)
Changes or modifications not expressly approved past the party responsible for compliance could void the user's authority to operate the equipment.
FCC Interference Argument (Part 15.105 (b)) (U.s. only)
This equipment has been tested and found to comply with the limits for a Course B digital device, pursuant to Office 15 of the FCC Rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, at that place is no guarantee that interference volition not occur in a detail installation. If this equipment does cause harmful interference to radio or tv set reception, which can be adamant past turning the equipment off and on, the user is encouraged to try to correct the interference by i of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit unlike from that to which the receiver is connected.
- Consult the dealer or an experienced radio/Tv set technician for help.
Thermostats
To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
RSS-GEN
Under Manufacture Canada regulations, this radio transmitter may simply operate using an antenna of type and maximum (or lesser) proceeds approved for the transmitter by Manufacture Canada. To reduce potential radio interference to other users, the antenna type and its proceeds should be so called that the equivalent isotropically radiated power (e.i.r.p.) is non more than that necessary for successful communication.
Functioning is subject to the following two conditions:
- This device may not cause interference, and
- This device must have whatever interference, including interference that may cause undesired operation of the device.
i-year limited warranty
Resideo warrants this production to be costless from defects in workmanship or materials, nether normal use and service, for a menstruation of one (i) yr from the appointment of outset purchase by the original urchaser. If at whatever time during the warranty menstruation the product is determined to exist defective due to workmanship or materials, Resideo shall repair or replace it (at Resideo's option).
If the product is lacking,
- render it, with a pecker of sale or other dated proof of purchase, to the identify from which you purchased information technology; or
- call Resideo Client Intendance at 1-800-633-3991. Customer Care will make the determination whether the product should be returned to the following accost: Resideo Return Goods, 1985 Douglas Dr. North., Golden Valley, MN 55422, or whether a replacement production tin can be sent to y'all.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Resideo that the defect
was caused by harm which occurred while the production was in the possession of a consumer.
Resideo's sole responsibleness shall exist to repair or replace the product within the terms stated above. RESIDEO SHALL NOT Exist LIABLE FOR ANY LOSS OR DAMAGE OF Any KIND, NCLUDING Any INCIDENTAL OR CONSEQUENTIAL Damages RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY Breach OF ANY WARRANTY, EXPRESS OR Unsaid, OR Whatever OTHER FAILURE OF THIS Production.
Some states do not allow the exclusion or limitation of incidental or consequential amercement, so this limitation may not apply to you.
THIS WARRANTY IS THE Simply EXPRESS WARRANTY RESIDEO MAKES ON THIS Product. THE Duration OF Whatsoever IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A Detail PURPOSE, IS HEREBY Limited TO THE I Yr DURATION OF THIS WARRANTY.
Some states do non allow limitations on how long an implied warranty lasts, then the in a higher place limitation may not use to you. This warranty gives you specific legal rights, and y'all may have other rights which vary from land to state. If yous have any questions concerning this warranty, delight write Resideo Customer Care, 1985 Douglas Dr, Golden Valley, MN 55422 or call one-800-633-3991.
www.resideo.com
Resideo Technologies Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Domicile trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates. Apple, iPhone, iPad, iPod bear on and iTunes are trademarks of Apple Inc. All other trademarks are the belongings of their respective owners.
Read More Nigh:
Honeywell WiFi Thermostat Installation Manual
Honeywell WiFi Thermostat Installation and Programming Manual Optimized PDF
Honeywell WiFi Thermostat Installation and Programming Manual Original PDF
How To Register Your Honeywell Thermostat,
Source: https://manuals.plus/honeywell/honeywell-wifi-thermostat-programming-user-manual
Posted by: camposturs1938.blogspot.com
0 Response to "How To Register Your Honeywell Thermostat"
Post a Comment